Filter
Top Products
Maintaining your iron
Cleaning the soleplate
Clean the soleplate if starch or other residue
accumulate.
To clean the soleplate:
1.
Allow the iron to cool and then wipe it with a
soft, damp cloth.
WARNING:
DO
NDTuse abrasive cleansers,
scouring pads or vinegar to clean the soleplate,
this will damage the finish.
2.
Run the iron over an all-cotton cloth to remove
any residue.
Using the self-cleaning feature
You should use the self-cleaning feature to maintain
the optimal performance of your iron. The
self-
cleaning feature will clean the water reservoir and
steam vents of accumulated minerals, dust and lint.
In general, clean the iron:
.
if the steam vents clog up,
01
.
once a month if you have hard water,
OY
.
once every two months if you have soft water
To use the self-cleaning feature:
1.
Make sure that the Steam control and the
Fabric Select dial are set to OFF.
12