Sunbeam 3020 Iron User Manual


 
.
.
.
lq
Your
Trnn
I
Cleaning the Soleplate
Clean the soleplate if starch or other residue
accum11latc.
To clean the Soleplate:
1.
Allow the iron to cool and
then
wipe it with
a
soft, damp cloth.
WARNING: DO
Not use
abrasive cleansers,
scouring pads or vinegar to clean the soleplate,
this will damage the finish.
2.
Run
the iron over an all-cotton cloth to remove
any residue.
Using the Self-Cleaning Feature
You should use the self-cleaning feature to maintain
the optimal performance of your iron. The
self-cleaning
feature will clean the water reservoir and steam
vents of accumulated minerals, dust and lint.
In general, clean the iron:
.
if the steam vents
clog
up,
or
.
once a month if you have hard water,
or
.
once every two months if you have soft water
To use the self-cleaning feature:
1.
Make sure that
the
Steam Control and
the Fabric Select dial are set to OFF.
12