Filter
Top Products
As needed cleaning:
Laundry detergent and fabric softener residue can build up on the lint filter. This buildup can cause
longer drying times for your clothes, or cause the dryer to stop before your load is completely dry.
If lint falls off the filter it is probably clogged.
Clean the lint filter with a nylon brush about every six months, or more frequently if it becomes
clogged due to a residue buildup.
To wash
1 Use your fingers to roll lint off filter.
2 Use hot water and wet both sides of lint filter.
3 Use hot water and liquid detergent to wet a nylon brush. To remove residue buildup scrub lint
filter with the brush.
4 Use hot water to rinse filter.
5 Use a clean towel to thoroughly dry lint filter. Insert lint filter back into dryer.
CLEANING THE DRYER INTERIOR
PLEASE REFER TO PAGE 9 OF THE WHIRLPOOL USE & CARE GUIDE.
REMOVING ACCUMULATED LINT
PLEASE REFER TO PAGE 9 OF THE WHIRLPOOL USE & CARE GUIDE.
TROUBLESHOOTING GUIDE
PLEASE REFER TO PAGE 10 OF THE WHIRLPOOL USE & CARE GUIDE
SERVICE, PARTS OR ASSISTANCE
Please refer to ‘Troubleshooting’ on page 10 of the Whirlpool Use & Care Guide before calling for
service or assistance. It may save you the cost of a service call. Please follow the instructions below
if you still need help.
Please know the purchase date, model number, and serial number of your dryer when calling. This
information will be helpful for us to better respond to your request.
If you need replacement parts, assistance, or service
Please call Staber Industries at 614-548-0098.
STABER DRYER WARRANTY
WARRANTY COVERAGE
ONE YEAR FULL WARRANTY FROM DATE OF PURCHASE
When this dryer is operated and maintained according to instructions attached to or furnished
with the product, Staber Industries will be responsible for:
Replacement parts and/or repair labor with prior written authorization to correct defects in
materials or workmanship.
SECOND THROUGH THIRD YEAR LIMITED WARRANTY FROM DATE OF PURCHASE
When this dryer is operated and maintained according to instructions attached to or furnished
with the product, Staber Industries will be responsible for:
Replacement parts to correct defects in materials or workmanship, with the owner paying all other
costs, including labor, mileage and transportation.
6