Filter
Top Products
8
9
Setup for VoIP Analog Adapter boxes Setup
IMPORTANT NOTICE: The Aura SoHo™ Conference
Phone has echo and noise cancellation which is optimized
for ANALOG telephone lines (land lines). If you have a
standard Analog phone line, the instructions on this sheet
do not apply to you. Please proceed to page 10, Using the
Aura SoHo™.
However, if your phone service is through a VoIP ANALOG
ADAPTER, you will have to modify the settings on the Aura
SoHo™ Conference Phone to maintain the call quality and
use the proper echo and noise cancellation settings. If you
have a VoIP Analog Adapter, your service could be from
one of the following providers and have the following
plan names:
Lingo - (Using a Linksys VoIP adapter) - Hello World
Unlimited, Hello America Unlimited, Hello America 500,
Hello America 250, Talk 365, Business Value Plan, Business
Plus Plan, Business Premium
Vonage - (Using a D-Link VoIP adapter) - Residential
Premium Unlimited, Vonage Pro, Residential Basic 500
Minutes, Small Business Premium Unlimited Plan, Small
Business Basic 1500 Minutes
AT&T - (Using an AT&T VoIP adapter) - U-verse, Business in
a Box, AT&T Voice DNA, AT&T IP Flexible Reach
Comcast Cable - (Using a VoIP phone adapter) - Comcast
Unlimited, Local with More, Comcast HD Double Play,
Comcast HD Triple Play, Comcast Digital Voice
If you think you might have a VoIP Analog Adapter but
aren’t sure, please contact your provider. If you still need
help, call Spracht directly for assistance at 888-350-0132.
To modify the settings on the Aura SoHo™ Conference
Phone for a VoIP Analog Adapter Box
1. After you have followed the set up steps 1 through 6 on
the previous pages (6 and 7), the unit will be ready after
you hear the two tones.
2. Conrm the Aura SoHo™ Conference Phone is connected
properly by pressing the Power button �. The keypad back light
will go on and you will hear a dial tone. Wait for 5 seconds, then
press the Power button � again to turn OFF the unit.
3. Next, you will be changing the Aura SoHo™ Conference Phone
setting to VoIP mode. The unit should be in On Hook state, which
means no dial tone, and the keypad back light will be o. Press
these keys on the keypad: 1, 0, 1. The keypad backlight will go on
and two tones will sound. Wait about 5 seconds; the keypad light
will go o and then ash once. The unit is now switched over to
VoIP mode and will stay in that setting the next time you turn the
phone on.
4. You can now follow the User Guide instructions for making a
call (page 10).
To change back to Analog Phone line mode
You will need to reset the internal counter again. Press the Power
button �. The keypad back light will go on and you will hear a dial
tone. Wait for 5 seconds, then press the Power button � again to
turn OFF the unit.
The Aura SoHo™ Conference Phone should be in On Hook state,
which means no dial tone, and the keypad back light will be o.
Press these keys on the keypad: 1, 0, 0. The keypad backlight will
go on and two tones will sound. Wait about 5 seconds; the keypad
light will go o and then ash once. The unit is now switched back
to Analog phone line and will stay in that setting the next time
you turn the phone on.