Speed Queen 20 lb Washer User Manual


  Open as PDF
of 6
 
Washer-Extractor Specifications
AC04-216
www.speedqueen.com
®
* Overall depth includes drain pipe and door handle.
** Standard domestic voltage 208–240/60/3. Circuit breaker and amp draw data shown is for standard voltage models without auxiliary heat. Consult factory for other
configurations. Manufacturer strongly recommends using a circuit breaker instead of fuses. Use 3-pole circuit breakers for 3-phase machines. All CE approved models
available in 50 hz 20-60 models.
*** Agency approvals may vary depending on configuration. Consult factory for details. Steam connection requires 1/2” N.P.T.
Due to continuous product improvements, design and specifications subject to change without notice. The quality management systems at all Alliance Laundry Systems
facilities are registered as ISO 9001:2000 compliant.
©Copyright 2004 Alliance Laundry Systems LLC
SC20 SC25 SC30 SC40 SC60 SC80
Capacity - lb (kg) 20 (9) 25 (11.3) 30 (13.6) 40 (18) 60 (27) 80 (36)
Width - in (mm) 26” (660) 26” (660) 29” (737) 30 5/8” (778) 34 1/16” (865) 41 1/2” (1054)
Depth - in (mm)* 29 11/16” (754) 33 11/16” (856) 35” (889) 40” (1016) 42 4/5” (1086) 51 5/8” (1312)
Height - in (mm) 42” (1067) 45” (1143) 45” (1143) 47 1/4” (1200) 50” (1269) 56” (1422)
Cylinder Diameter - in (mm) 21” (533) 21” (533) 24” (610) 26 1/4” (667) 30” (762) 36” (914)
Cylinder Volume - cu. ft. (liters) 2.8 (78.1) 3.8 (106) 4.2 (118) 6.3 (180) 9.0 (255) 13(368)
Door Opening Size - in (mm) 12” (305) 12” (305) 14 11/32” (364) 16 1/4” (413) 16 1/4” (413) 18 1/2” (470)
Door Bottom to Floor - in (mm) 14 3/8” (366) 14 3/8” (366) 14” (356) 14 1/2” (368) 13 1/2” (343) 17 5/8” (451)
G-Factor (High Extract) 82 87 78 82 86 40/85/142
Wash Speed - rpm 53 55 47 47 44 22/40
High Extract - rpm 525 540 480 470 450 280/408/524
Water Inlet Conn. - in (mm) 3/4” (19) 3/4” (19) 3/4” (19) 3/4” (19) 3/4” (19) 3/4” (19)
Drain Diameter - in (mm) 2” (52) 2” (52) 2” (52) 3” (76) 3” (76) 3” (76)
Drain Height to Floor - in (mm) 4 3/8” (111) 4 3/8” (111) 4” (102) 4 3/4” (121) 3 1/2” (89) 5 3/4” (146)
Motor HP (wash) - HP (kW) .18 (.13) .25 (.19) .25 (.19) .40 (.30) .55 (.41) N/A
Motor HP (extract) - HP (kW) 1.0 (.75) 1.4 (1.04) 1.4 (1.04) 1.8 (1.3) 2.7 (2.01) 5 (3.7)
Voltage/Hz/Phase** B 110-120/60/1
•
20-15 N/A N/A N/A N/A N/A
Circuit Breaker-FLA amp C 380-415/50/3
•
15-4 380-415/50/3
•
15-4 380-415/50/3
•
15-4 380-415/50/3
•
15-5 380-415/50/3
•
15-4 N/A
D 220-240/50/3
•
15-5 220-240/50/3
•
15-6 220-240/50/3
•
15-6 220-240/50/3
•
20-7.5 220-240/50/3
•
20-7 N/A
E 220-240/50/1
•
20-10 220-240/50/1
•
20-10 220-240/50/1
•
20-10 N/A N/A N/A
F 440-480/60/3
•
15-4 N/A N/A N/A N/A N/A
H 380/60/3
•
15-4.8 380/60/3
•
15-4.8 380/60/3
•
15-4.8 380/60/3
•
15-4.8 380/60/3
•
15-3 N/A
J 220/50/3
•
20-7.5 220/50/3
•
20-7.5 220/50/3
•
20-7.5 220/50/3
•
20-7.5 220/50/3
•
20-8 N/A
N N/A N/A N/A N/A N/A 440-480/50-60/3
•
15-4.5
O** 220-240/60/3
•
15-5 220-240/60/3
•
15-6 220-240/60/3
•
15-7 220-240/60/3
•
20-7.5 220-240/60/3
•
20-7 N/A
P N/A N/A N/A N/A N/A 380-415/50-60/3
• 15-4.5
Q** N/A N/A N/A N/A N/A 200-240/50-60/3
• 20-12.4
X N/A N/A N/A N/A 220-240/50-60/1-3
•
20-9 N/A
Y 208-240/60/1
•
20-10 208-240/60/1
•
20-10 208-240/60/1
•
20-10 208-240/60/1
•
20-13.5 N/A N/A
Shipping Dimensions - H 51” (1295) 53 1/2” (1359) 53 1/2” (1359) 56 1/2” (1422) 58 1/2” (1486) 62 1/2” (1588)
in (mm) W 29” (737) 29” (737) 30 1/2” (775) 32” (813) 36” (914) 48” (1219)
D 32 1/2” (826) 36 1/4” (921) 37 1/2” (953) 41” (1041) 44 1/2” (1130) 56” (1422)
Net Weight - lb (kg) 390 (177) 435 (198) 495 (225) 706 (321) 767 (348) 1406 (633)
Shipping Weight - lb (kg) 410 (186) 470 (214) 535 (243) 744 (338) 818 (371) 1456 (655)
Export Shipping Weight - lb (kg) 480 (218) 530 (241) 601 (273) 846 (385) 997 (452) 1506 (678)
Agency Approvals*** CE, ETL, ETLc CE, ETL, ETLc CE, ETL, ETLc CE, ETL, ETLc CE, ETL, ETLc CE, ETL, ETLc
 previous