Filter
Top Products
25
M412616
Cabinet Finish: Electrostatically applied thermosetting polyester
Cylinder: 37" x 36" (94 x 91.4 cm) perforated galvanized steel cylinder with four baffles;
75 pounds (34.1 kg) dry weight (cotton load)
Motor: 3/4 H.P., lifetime lubricated, internal overload protected.
(Non-reversing models) (See below for reversing models.)
Electrical Requirements
Nonreversing Models: 230 Volt, 50 Hertz, 1 Phase, 9.0 Amp
Electrical Requirements
Reversing Models: 230 Volt, 50 Hertz, 1 Phase, 9.0 Amp
Gas Consumption: 165,000 B.T.U. per hour (174.1 MJ/hr.)
Types of Gas: Factory equipped with Natural/Mixed gas (6-1/2 A 1-1/2 inch
water column line pressure) (1.62 A .37 kPa); or Liquefied Petroleum gas
(11.0 A .3 inch water column line pressure) (2.74 A .07 kPa)
Gas Connection: 1/2 inch (12.7 mm) N.P.T.
Air Flow: 1000 C.F.M. at 0.5" W.C.
(472 liters/sec. at 1.25 mBar)
Net Weight: 550 Pounds (250 kg) (approximate)
Calorific Value: Natural Gas — 8900 kCal/m
3
(37.2 MJ/m
3
)
L.P. Gas — 22250 kCal/m
3
(93.1 MJ/m
3
)
75 Pound (34 kg) Gas Tumblers
REVERSING MOTOR SIZES
GAS ELECTRIC
STEAM
HIGH PRESSURE LOW PRESSURE
75 LB.
FAN
1/3 H.P. 1/3 H.P. 1/3 H.P. 1/2 H.P.
CYLINDER
1/3 H.P. 1/3 H.P. 1/3 H.P. 1/3 H.P.