Filter
Top Products
-11-
802759
5. Set WASH/RINSE temperatures.
There are four or five WASH/RINSE temperatures
available – Boosted Hot Wash/Cold Rinse (select
models only), Hot Wash/Cold Rinse, Warm Wash/
Warm Rinse, Warm Wash/Cold Rinse, Cold Wash/
Cold Rinse.
The Energy Saver settings, marked with an
asterisk (
*) on some models, show which
temperature settings will use the least energy.
Refer to the Water Temperature section for the
temperature that works best for your garments.
6. Select EXTRA RINSE if desired.
The extra rinse control is useful for detergent
sensitive skin. By pressing the EXTRA RINSE to
ON, the REGULAR, PERMANENT PRESS, and
HANDWASH/DELICATE cycles will each provide an
additional rinse. If the rinse is desired, press the
switch to ON. When the extra rinse is not wanted,
OFF should be selected.
7. Select the cycle according to the type of
fabric being washed. Use the indicator dot on
the cycle selector knob as a guide.
8. Press and hold the START button for two
seconds to start the washer. The DOOR light
will come on after a short delay, water fill will
begin, and wash drum will begin tumbling.
NOTE: Washer door MUST be closed tightly to
start washer.
If items need to be added or removed after a cycle
has started, turn the cycle selector knob to the
OFF position. Wait until the DOOR light goes off
(approximately 45 seconds after cycle has been
stopped), open door, add or remove items, and
start the cycle again.
There is no agitator on this washer. Instead, the
clothing gently tumbles through the water. The
wash action consists of a period of tumbling in
one direction, a brief pause, and then a reverse
tumble in the opposite direction. The pauses are
part of the tumble action and add to the unique
cleaning capabilities of the washer. They are part
of the cycle.
NOTE: There will be extended pauses when
Boosted Hot Wash, if available, is selected
because the water is being heated.
FLW2071N
WARNING
Window may be hot in the Boosted Hot
and Hot wash cycles.
W325
TLW2000N