Filter
Top Products
GB 16
INSTALLATION
Removal of transport bracket
The washing machine is fitted with a transport bracket to
avoid any possible damage during transport.
IMPORTANT: Before using the washing machine, the
transport bracket at the back MUST be removed.
1.
Unscrew the two screws “
A
”
and the four screws “
B
”
with a flat screwdriver or a No. 8 hex nut box spanner.
2.
Remove the transport bracket.
3.
Replace the four outer screws “
B
” on the machine and
tighten them.
4.
Clip the two seals “
C
” supplied into the openings “
D
” of
the washing machine.
Note: do not forget to replace and tighten the four
outer screws.
2
1
1
4
C
A
B
D
1
4
D
IFU-TL HR GB.fm Page 16 Thursday, February 15, 2007 3:35 PM
Black process 45.0° 100.0 LPI