Smeg K400TL Washer User Manual


 
GB 15
INSTALLATION
Removal of transport bracket
The washing machine is fitted with a transport bracket to
avoid any possible damage during transport.
Before using the washing machine, the transport
bracket at the back MUST be removed.
1.
Unscrew the two screws
A
and the four screws
B
with a
flat screwdriver or a No. 8 hex nut box spanner.
2.
Remove the transport bracket.
3.
Replace the four outer screws
B
on the machine and
tighten them.
4.
Remove the two seals
C
from the hose holder and clip
them into the openings of the machine
D
.
Note: do not forget to replace and tighten the four
outer screws.
2
1
1
4
C
A
B
D
1
4
D
6GB10055.fm Page 15 Monday, August 2, 2004 12:33 PM