Smeg 129530 Clothes Dryer User Manual


 
129530
Appliance can either stand on its own or can be placed on
top of a washing machine of the same dimensions - minimum
width 517 mm, depth 476 mm. The surface for placing the
dryer must be clean and at. Use supplied vacuum feet to
prevent sliding of the appliance. Washing machine hardtop
must be wooden or metallic. To conceal the opening between
the two appliances, decorative plate is available on request
against payment.
Do not place the appliance behind lockable door,
sliding door, and door with hinges on the opposite side
of the appliance.
Place the appliance in the room in such way to ensure
free opening of the drier door.
Level the machine longitudinally and transversally by rotating
the adjustable feet, thus enabling the leveling by +/- 1 cm.
Vibrations, moving of the appliance and loud operation
due to incorrect setting of the adjustable feet shall not
be covered by this warranty.
The appliance should be placed on a surface with
concrete base; the surface should be dry and clean in
order to prevent slipping. The adjustable feet should
also be cleaned before installation.
Do not place the dryer on a thick carpet since this
could obstruct the air circulation.
A - Evacuation dryer
There are two openings for venting out humid air. One of them
should be closed with the supplied lid, while the other should
be connected to the evacuation tube.
InstallationInstallation
1 Lid
2 Evacuation tube
Moist air outlet
1 Lid
2 Evacuation tube
Moist air outlet
6