Silvercrest SDB 2000 A1 Iron User Manual


 
- 6 -
Casing
Danger of injury!
Pull the mains power plug before cleaning. There is
a risk of electrical shock! Allow the device to cool
off. Danger of burning!
Clean the casing only with a soft dry cloth.
Do not use aggressive or chemical cleaning
agents.
Metal Parts
Clean the metal parts with a cloth slightly
moistened with water and a mild, non-foaming
cleaning agent.
Troubleshooting
The steam iron puts out only little or no steam
The water reservoir in the steam iron is empty. Fill
the water reservoir with tap water (see "Filling with
Tap Water“).
The steam iron does not get hot
The steam iron is not plugged in or not switched on.
Plug the power plug into the power socket and set
the temperature control
a
to the desired
temperature.
The steam iron is defect. Have the defect steam iron
repaired by qualified technicians.
Technical Data
Power Supply Voltage: 220 - 240 V
~
/50 Hz
Output: 1600 - 2000 W
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally responsible manner.
IB_54335_SDB2000A1_LB6 08.07.2010 9:59 Uhr Seite 6