Filter
Top Products
5
ENGLISH
MIXMODE/STEREO
The P4R receiver receives two signals (1/L and 2/R) from the P4T transmitter. The P4R processes these signals
in either stereo or MixMode:
FIGURE 4
STEREO: In stereo, the signals remain separate so 1/L is heard through the left earphone and
2/R is heard through the right earphone. The balance knob on the receiver adjusts the balance
between the left and right earphones.
MIXMODE: In MixMode, the signals are “mixed” in relation to one another using the balance knob, blending
into one signal. The mixed signal is sent to both the left and right earphones.
FIGURE 5
MIXMODE IN APPLICATIONS
MixMode is most useful when two distinct mixes are provided to the P4T transmitter, such as a band mix and a
vocal mix. MixMode combines these two signals into one monitor mix and allows you to control this mix during
the performance with the P4R receiver. For example, if the band overpowers the vocals in the mix, increase the
level of the vocals and decrease the level of the band by simply adjusting the balance knob.
1/L
2/R
1/L
2/R
1/L+2/R
1/L
2/R
Signal from
Audio Source
Signal from
Audio Source
MIXED
STEREO
MIXMODE
P4T transmitters P4R receivers
Step One: The P4R re-
ceives TWO signals from
the P4T transmitter.
Step Two: Using the balance knob, the
user blends the two signals until the
correct mix is achieved.
Step Three: The P4R
sends the mixed signal to
both earphones.
Step Four: The user may con-
tinue to adjust the blend using
the balance knob throughout
the performance.
CLOCKWISE
MID-POINT
COUNTERCLOCKWISE
MIXMODE
channel 1
MIXMODE
channel 2
USING MIXMODE