Filter
Top Products
27 28
T: 0800 0124 382 T: 0800 0124 382
USAGE
Before using your Washer Dryer for then first time; please check that:
1
The transit bolts have been removed.
2
Your Washer Dryer has been correctly connected to your water supply and your water
drainage system.
3
Your Washer Dryer has been connected to an appropriate mains power supply and is
switched on at the socket.
Tests were carried out on your Washer Dryer at the factory; as a result, water may be left in
the machine. To remove any water we recommend that the first wash is carried out without any
laundry:
1
Open the detergent drawer, pour in half a measuring cup of all-purpose detergent into
compartment II and close the drawer.
2
Select the ‘Drum Cleaning’ programme by turning the programme dial to extras. ‘drum
clean’ will be displayed on the information screen.
3
Press the button to select the programme.
3
Press the button to begin the programme.
Please follow the steps suggested to get the best results from your washing.
Preparing your Laundry:
CAUTION:
Please be aware that any foreign objects such as coins or paper clips can cause
damage to your garments and components in your Washer Dryer.
Empty all pockets on items of clothing, brush out any sand and dirt from pockets and cuffs.
Close zips and fasten any hooks and eyes.
Items such as trousers, t-shirts, sweat shirts and knitted garments should be turned inside
out.
Remove any weights from curtains, or place in a laundry bag.
Any loose wiring in bras and shirt collar stiffeners should be removed or sewn in.
Sorting your Laundry:
Sort your laundry by colour. Always wash whites and coloureds separately.
Dark textiles may contain excess dye and should be washed separately several times
before being included in a mixed load.
Follow the instructions given in the care labels on the clothing.
Do not wash any items in the machine that the manufacturer has specified as non-washable
on the care label.
Do not dry any items in the Washer Dryer that the manufacturer has specified as non-dry on
the care label.
Badly soiled or stained areas can be pre-treated with liquid detergent or stain removers by
following the manufacturer’s instructions.
If you use a solvent-based cleaning agent to pre-treat a stain, protect any plastic parts such
as buttons. Rinse the cleaning agent off before loading the washing into the machine.
Do not use a solvent-based cleaning agent in your Washer Dryer.
Loading the Drum:
1
Pull the door open using the handle.
2
Select a programme before loading laundry into your Washer Dryer. If you do not select a
programme the load sensor will not be activated.
3
Load your items of clothing into the drum, ensuring they are loosely packed. You will achieve
better wash results if you mix up large and small items. Items of varying size will help
distribute the load more evenly during spinning.
RUNNING YOUR FIRST WASH
WASHING SEQUENCE