Filter
Top Products
FEATURES
E1 Lint Screen
Keep the lint screen clean. A lint-clogged screen will slow down the flow
of air. This makes drying time longer and wastes energy. Clean the lint
screen before each load as follows:
1. With dryer off, remove the screen by pulling straightup.
2. Roll the dry lint off the screen. Do not wet the screen or lint; wet lint is
hard to remove.
3. Replace the cleaned lint screen.
Fire Hazard.
Do notuse your dryer while the lint screen is removed.
It could cause overheating and possible damage to fabrics and dryer
parts or create a fire hazard. Lint screen must be pushed firmly into
place.
III I I I
NOTE: A whistle tone will remind you when the lint screen needs
cleaning.
NOTE: If lint screen gets clogged by detergent or fabric softener build-up,
remove and clean it with a nylon brush, hot water and liquid detergent.
Dry and replace screen.
i_ Safety Door Switch
For safety, the switch shuts off dryei when door is opened. Dryer will not
start until door is closed and START is pushed. Be sure the Cycle Selector
Control is on a dry setting.
Ik_ Model No. Plate
Shows model and serial numbers. Have these ready if you ever call for
service.
l_ Performance Guide Label
Located inside the dryer door. Gives information on what to do if dryer
does not perform normally.
•El Easy Loader Door
Drop down door is located to reduce stooping. It can also serve as a shelf
forfolding clothes. The large opening makes it easy to load and unload and
to see inside dryer. Clothes indryer are easy to reach.
NOTE: If dryer drum is stained, clean it with a damp cloth and mild
detergent.
For more detailed drying times, roles for safe operation, fabric care,
maintenance and installation information, refer to the LAUNDRY
GUIDE and INSTALLATION INSTRUCTIONS you received with
yourdryer.
i i
Part No. 3392334 Printed in U.S.A.