Filter
Top Products
20
Options
You can customize your cycles by selecting options.
WRINKLE GUARD
®
WRINKLE GUARD
®
helps smooth out wrinkles that form when
you cannot unload the dryer promptly at the end of a cycle.
During this option, the dryer stops tumbling and then tumbles
again for a brief period.
■ Press WRINKLE GUARD
®
to get up to 2¹⁄₂ hours of heat-free,
periodic tumbling at the end of a cycle.
■ Stop WRINKLE GUARD
®
at any time by pressing WRINKLE
GUARD
®
or opening the dryer door.
■ For the Casual cycle, WRINKLE GUARD
®
is preset to ON. The
other Auto Cycles will retain the WRINKLE GUARD
®
setting.
For example, if you select WRINKLE GUARD
®
in the Normal
cycle, WRINKLE GUARD
®
will be on the next time you select
the Normal cycle.
NOTE: If you do not select WRINKLE GUARD
®
, the dryer stops
after cool down.
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in a
mixed load or large items in the “Bulky/Bedding” cycle. When the
signal goes off, open the door to stop the dryer, rearrange the
load inside the dryer, close the door and restart the dryer to finish
the drying cycle. Rearranging the load will aid in the drying
process.
For the “Bulky/Bedding” cycle, the Damp Dry Signal is preset to
ON.
NOTE: The Damp Dry Signal is available only with the Auto
Cycles.
Button Sounds
You can change the volume of the sound of the beeps. Press
BUTTON SOUNDS until the desired volume (Loud, Soft or Off)
glows. The Power and Cancel buttons will still beep softly when
the Button Sounds volume is set to Off.
Drum Light
Press Drum Light to turn on the light inside the dryer drum.
During a cycle, if Drum Light is selected, the drum light turns on
and will remain on until DRUM LIGHT is pressed again, the door
is open and closed, or the door is left open for 5 minutes.
When the dryer is not running, the drum light will turn on when
DRUM LIGHT is pressed or the dryer door is opened, and it will
remain on until the dryer door has been open for 5 minutes, the
dryer door is closed or DRUM LIGHT is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFF.
Modifiers
Use Modifiers to select time, temperatures and dryness levels for
the Timed Cycles.
Time
Press MORE TIME or LESS TIME until the desired drying time is
displayed. The time cannot be changed with Auto Cycles.
Temperature
Press TEMPERATURE until the desired temperature setting
glows. Temperature modifiers cannot be used with the Auto
Cycles or with Rack Dry or Air Fluff cycles.
Dryness Level
Press DRYNESS LEVEL until the desired Dryness Level is
selected. Dryness Level cannot be adjusted with Timed Cycles.
Changing Cycles, Options and Modifiers
You can change Auto Cycles, Timed Cycles, Modifiers and
Options anytime before pressing Start.
■ Three short tones sound if an unavailable combination is
selected. The last selection will not be accepted.
Changing Cycles after pressing Start
1. Press STOP twice. This ends the current cycle.
2. Select the desired cycle and options.
3. Press and hold START. The dryer starts at the beginning of
the new cycle.
NOTE: If you do not press START within 5 minutes of selecting
the cycle, the dryer automatically shuts off.
Changing Modifiers and Options after pressing Start
You can change a Modifier or Option anytime before the selected
Modifier or Option begins.
1. Press STOP once.
2. Select the new Modifier and/or Option.
3. Press and hold START to continue the cycle.