• 4 •
FEATURES3.
Jump Start/USB On/Off Switch1.
USB Port2.
Built-In Work Light3.
Digital Display4.
Display Button5.
Work Light On/Off Switch6.
Inverter On/Off Switch7.
12 Volt DC Outlets8.
120 Volt AC Outlets9.
Compressor Hose10.
Compressor Gauge11.
Compressor/InatorSwitch12.
InatorPort13.
Charger Plug14.
Wall Charger15.
Battery Clamps16.
DeatorPort17.
Adapters18.
Male to Male Adapter19.
InatorHose20.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
20
19
16
CHARGING THE INTERNAL BATTERY OF THE INSTANT POWER™4.
IMPORTANT: CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH
BATTERY FULLY CHARGED.
Check the internal battery’s charge level by pressing the Display Button. The 4.1
Digital Display will show the battery’s percent of charge. Charge the internal
battery if the display shows it is under 100%
NOTE: Internal battery’s percent of charge is most accurate when the Instant
Power™ has been disconnected from all devices and charging sources for a
few hours.
4.2
To charge, plug the included wall charger into the charger plug on the back 1.
of the Instant Power™.
Plug the wall charger into a 120V electrical wall outlet.2.