Sanyo Microcomputer Control Fully Automatic Washing Machine Washer User Manual


 
1212
VARIOUS FUNCTIONSVARIOUS FUNCTIONS
1.Press POWER ON/OFF button and make sure to fit the Drain Hose.
2.Press COURSE button continuously and choose the BLANKET course (The
BLANKET Light flashes).
3.After the detergent is dissolved with proper amount of warm water (approx. 30), pour it
into the tub of the washing machine.
4.Fold up the blanket as the method showed in the figures below and put it into the
washing tub.
5.Press the START/PAUSE button.
6.Close the washer lid.
1 1 2 2 3 3 44
Put it into the wash tub with
the edge downwards
Fold in two by the
long side
Fold 4 times in the
same direction
Roll up the blanket.
BLANKETBLANKET
The washer will start washing when water to the level below 2 levels as set. By this, the
washer starts working with more density of detergent.
This function won't be effected when select level 1 or level 2 water, and DELICATE
or BLANKET program.
When SOAK is selected, this function will not be effected after soaking.
TWO CLEAN STEPS FUNCTIONTWO CLEAN STEPS FUNCTION
The Washer will stop working automatically and alarm if wash lid opened 5
during operation.
Method of Child Lock Set: Press POWER ON/OFF button to switch on the power, press
WATER LEVEL button for 4 seconds till Buzzer sounds. To restore it, repeat above or pull
out the plug.
er seconds
CHILD LOCK FUNCTIONCHILD LOCK FUNCTION
Under CUSTOM, if set 2 times rinses, the first rinse will be shower rinse. If you don't want
shower rinse, you can cancel it and it will change to Water Saver Rinse or Overflow Rinse.
Method of use:
Press POWER ON/OFF button to switch on the power, and press SET button for 4
seconds till a sound from buzzer. To restore it, repeat above or pull out the plug.
REMEMBER FUNCTIONREMEMBER FUNCTION
SHOWER RINSESHOWER RINSE
1111
HOW TO USE COURSE AND PROCESSHOW TO USE COURSE AND PROCESS
5~12
7~14
6
12
10
OPERATION STATUS FOR THE COURSE
COURSE
NORMAL
HEAVY DUTY
DELICATE
BLANKET
CUSTOM
Wash Time
(minutes)
Rinse Type and Rinse Times
Water Saver Rinse 2 times
Overflow Rinse 2 times
Overflow Rinse 2 times
Overflow Rinse 2 times
Shower Rinse 1 times
Water Saver Rinse 1 times
Spin Time
(minutes)
4-5
7-8
2
8
5
Possible the total time is not same due to different water pressure.
Shower rinse could be changed as . Please see Page 12 instructions
SHOWER RINSE.
Water Saver Rinse
6 7 8 24 0 1 5(hours)
…… ……
VARIOUS FUNCTIONSVARIOUS FUNCTIONS
1. Press POWER ON/OFF button
2. Turn the faucet on and load the laundry into the washer.
3. Select your needed OURSE, PROCESS and WATER LEVEL.
4. Press PROCESS button till light of PRESET flashes, press SET button select your
needed preset time ( the time washing finished).
PRESET Indicate
5. Press START/PAUSE button.
6. Put the detergent into the washer and close washer lid.
All the lights except PRESET will be lighted off in about one minute later.
Directly put the detergent into the tub. ( Do not make detergent touching
clothes)
PRESET confirming: Press SET button to indicate PROCESS about 5 seconds.
PRESET cancel, change: PRESET is canceled automatically when power
off; Switch power on and set PRESET again to change it.
This function is not available for DELICATE course.
and make sure to fit the Drain Hose.
C
PRESETPRESET
This button allows you to choose the appropriate water level during WASH / RINSE
process.
Method: Press PROCESS till WASH light flashes, press WATER LEVEL button to choose
the appropriate water level, press SET button to set wash time. Then press PROCESS
button till RINSE light flashes, press WATER LEVEL button to choose the appropriate
water level, press SET button to set RINSE times and RINSE type. Then press PROCESS
button till SPIN light flashes, press SET button to set SPIN time. Finally press
START/PAUSE, the washer will start operating according to the wash water level and
rinse water level as set.
WATER LEVEL SETTINGWATER LEVEL SETTING
1212
When select NORMAL, CUSTOM or HEAVY DUTY, 30 seconds after starting, the
washer will remember this program and starts same next time working.
PRESET SOAK and WATER LEVEL will not be remembered.
The Wash, Rinse and Spin for CUSTOM program could be remembered.
●This function is not available for DELICATE and BLANKET course.
,
●The memory will be lost if pull out the plug.