Filter
Top Products
28_ Troubleshooting
troubleshooting
ERROR IMAGE MEANING SOLUTION
nF1
The hot/cold water hose connection is
not correct.
Please connect the hot/cold water hose
connection correctly.
Sr
Problem with control. Call for service.
OE
A fault is detected in the water level
sensor.
Call for service
E2
Jammed key. Call for service
tE
Temperature sensor problem. Restart the cycle.
If the code reappears, call for service.
3E
Motor problem. Restart the cycle.
If the code reappears, call for service.
AE
Communication error between SUB
PBA and MAIN PBA
Call for service
SF
System error Call for service
SUdS
Too many suds are detected during the
washing session.
The unit is put on hold until the suds
are reduced. Then, the unit will go back
into the operation.
When it fi nishes washing, “End” and
“SUdS” codes will blink in turn.
Reduce the amount of detergent you
use.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
WF431ABP-03016A-02_EN.indd Sec6:28WF431ABP-03016A-02_EN.indd Sec6:28 2011-04-04 1:43:412011-04-04 1:43:41