Filter
Top Products
36_ troubleshooting
ERROR IMAGE MEANING SOLUTION
nF1
This error code appears when the
water temperature is 50 °C or above
for 8 seconds or longer in the Wool and
Delicate course.
Please connect the hot/cold water hose
connection correctly.
OE
Water detected over the safe water
level.
Call for service
E2 Jammed key. Call for service
tE
Temperature sensor problem. Restart the cycle.
If the code reappears, call for service.
3E
Motor problem. Restart the cycle.
If the code reappears, call for service.
AE
Communication error between SUB
PBA and MAIN PBA
Call for service
SF
System error Call for service
SUdS
Too many suds are detected during the
washing session.
The unit is put on hold until the suds
are reduced. Then, the unit will go back
into the operation.
When it fi nishes washing, “End” and
“SUdS” codes will blink in turn.
Reduce the amount of detergent you
use.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
troubleshooting
WF395BTPA-03145B-02_EN_20120829.indd 36WF395BTPA-03145B-02_EN_20120829.indd 36 2012-08-31 12:36:252012-08-31 12:36:25