Filter
Top Products
- 7 -
HOW TO WASH AUTOMATICALLY
DEPENDS ON THE LAUNDRY
Before starting washing, check the following;
•
Connect the water supply hose to the water tap. Leave a tap open. Plug the
power cord in. Make sure to lay down the drain hose.
■
WASHING FOR THE FIRST TIME
Before washing clothes for the first
time, you must run a complete cycle
without clothes. To do this:
1. Press the POWER button.
2. Pour a little detergent into
compartment in the detergent
drawer.
3. Turn on the water supply to the
washing machine.
4. Press the Start/Hold button.
This will remove any water from the manufacturer's test run remaining in the
machine.
SPECIAL NO
TES!
Automatic Sensing Function
•
At every course (except, wool course) the amount of laundry is
automatically sensed and then appropriate water level, washing time,
rinsing cycle, and spinning time are automatically selected for automatic
washing.
•
After the power is on, a course is selected and Start/Hold button is pressed.
Then, the washing board starts spinning without water. This action senses
how much laundry is in the washing basket, not a machine problem. After
this sensing process, water supplies automatically.
Adding Detergent and Softener
•
It senses the amount of laundry and indicates the water level and amount of
detergent. Then, it starts water supply right away.
•
During the water supply, it is possible to open the detergent box and add
detergent. However, it is better to press Start/Hold button to stop water
supply and add detergent. Close the lid and press Start/Hold button again.
This way is much more convenient.
•
If the softener is inserted in the softener dispenser, it automatically adds in
at the last rinsing cycle.
Put the laundry into the washer and add detergent, too.
•
Be careful not to overload. Use right detergent for the fabrics you are
washing.
■
DIGITAL COURSE
Selects the best washing course automatically.
1. Press the POWER Button to “ON”.
2. Press the START/HOLD button.
Water level is selected automatically. Washing rinsing, and spinning follow. If you
want to pause, press the START/HOLD button again. You can change the course
when paused.
3. Close the lid.
■
BLANKET / HEAVY COURSE
(Big volume laundry like blanket and bed cover sheets)
1. Press the power button to “ON”.
2. Press the course select button once.
3. Press the START/HOLD button.
Water level is selected automatically. Washing, rinsing, and spinning follow. If you
want to pause, press the START/HOLD button again. You can change the course
when paused.
4. Close the lid.
• Fold those big volume laundry (blanket and
bed cover sheets) in the following way
before adding into the spin basket.
•Do not wash the electric blanket and carpets.
•Get a laundry net for those light and big volume laundry (eg. Cashmeres)
because they might rise in the water and get damaged.
■
SOAK COURSE
1. Press the POWER button.
2. Press the course select button twice.
3. Press the START/HOLD button once.
Water level is selected automatically. Washing, rinsing, and spinning follow.
4. Close the lid.
D
ET
ERG
EN
T
F
A
B
R
IC
SO
FTE
N
ER
•
If the lid is open while running, the washing machine is stopped
automatically for safety. (Except, water supply continues while
the lid is open.)
•
When hot water is selected, both cold and hot water are sup-
plied for the first 20 seconds in order to protect the clothes.
•
Possible to control the washing time, rinsing cycle, and spin-
ning time at every course during the washing.
✽✩_✤✥K✴.❇m ✷❂❈❆ ✪ ✻❉❑❍■❅❂❖, M❂❍❄❉ ✤✫, ✥✣✣✧ ✥:✣✣ ✷M