Samsung WA484DSHAWR Washer User Manual


 
washing a load of laundry _25
Delay Start
You can set the washing machine to start your wash automatically at a later time, choosing a
delay time. The hour displayed indicates the time at which the wash will be started.
1. Set your wash course.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “Delay Start” indicator will be lit, and the clock will begin
counting down until it reaches the set time.
4. To cancel a Delay Start function, press the Power button and then turn the washing machine
on again.
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Press the Power button.
2. Open the door.
3. Load the articles of clothing one at a time loosely into the drum, without overfi lling it.
4. Add liquid detergent only, softener, and/or bleach (if necessary) to the appropriate
compartments. See pages 26~27.
5. Close the door.
6. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Normal, Heavy Duty, Perm Press, Sanitize, Towels, Bedding, Eco Wash, Stain Away, Active
Wear, Delicates/Hand Wash, Wool, Quick Wash, Rinse + Spin. The relevant indicators will
illuminate on the control panel.
7. At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate option button.
8. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
When the Garment + LED is on, you can add laundry items to or remove laundry items from the
wash.
To remove or add laundry items when the Garment + LED is on, follow these steps:
1. Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT.
2. Remove or add laundry items.
3. Close the door, and then press the Start/Pause button to restart the wash.
If you have Child Lock on, you must deactivate it fi rst. See page 23.
When the cycle is fi nished:
After the total cycle has fi nished, the power will turn o automatically.
1. Open the door.
2. Remove laundry.
03 washing a load of laundry
WA484DSHA-03050D_EN.indd Sec5:25WA484DSHA-03050D_EN.indd Sec5:25 2012-07-02  3:39:252012-07-02  3:39:25