Filter
Top Products
TO WASH (A-type)
1. Before starting to wash, proceed as follows,
Connect the water supply hose and open
the water tap.
• Lay the drain hose down toward
a sinkhole. (In case no drain pump)
• Place the drain hose in sink or bath.
(In case no drain pump)
• Connect the power cord to the power
supply outlet.
2. Set the CYCLE SELECTOR KNOB to
“WASH.RINSE”.(in case drain pump WASH)
3. Set the WTER SELECTOR
KNOB to the desired mode.
4. Set the WASH SELECTOR
KNOB to the desired mode.
5. Fill water in the wash tub
and add the detergent.
6. Load laundry in the
wash tub and fill water
to proper water level.
7. Set the WASH TIMER
1-15 minutes.
8. After washing, set the CYCLE
SELECTOR KNOB to
'DRAIN' for drain.
TO WASH (B-type)
1. Before starting to wash, proceed as follows,
Connect the water supply hose and open
the water tap.
• Lay the drain hose down toward
a sinkhole. (In case no drain pump)
• Place the drain hose in sink or bath.
(In case no drain pump)
• Connect the power cord to the power
supply outlet.
2. Select the WASH
CONTROL KNOB
for desired mode.
3. Press the
DRAIN SELECTOR KNOB
to ‘WASH’.
4. Fill water in the wash tub
and add the detergent.
5. Load laundry in the
wash tub and fill water
to proper water level.
6. Set the WASH TIMER
1-15 minutes.
7. After washing Press the
DRAIN SELECTOR KNOB to
‘DRAIN’ for drain.
TO SPIN DRY
1. Transfer the clothes into the
spin basket and arrange the
clothes evenly.
2. Be sure to replace the safety
cover and close the
inner lid.
3. Close the spin
dryer lid.
4. Set the SPIN DRY
TIMER 1-5 minutes.
WASHING PROCEDURE
A-type : SWT90C1(P)/SWT90C2(P)/WT10S0(P)/WT10S1(P)/WT10S2(P) B-type : SW-903(P)
Delicate
(LITE)
Heavy
Normal
WASH CONTROL
DRAIN
WASH
DRAIN SELECTOR
DRAIN
WASH
DRAIN SELECTOR
WATER SELECTOR
Wash
Spin
Wash/Rinse
Drain Rinse
CYCLE SELECTOR
Wash
Drain
CYCLE SELECTOR
0
3
1
4
2
5
SPIN DRY TIMER
0
9
3
12
6
15
WASH TIMER
inner lid
safty cover
0
9
3
12
6
15
WASH TIMER
3