Filter
Top Products
8
WASHING PROGRAM
SENSOR Program
The best washing program is chosen automatically
Load size and water level is determined automatically
Unplug the power cord after washing.
CLEANING THE TUB
Press the POWER button.
Press the PROGRAM button to select the HEAVY DUTY course.
Press the CYCLE button to select SOAK.
- You can select the water supply or temperature (hot/cold).
Press the WATER LEVEL button to select HIGH.
Press the START/HOLD button.
Add a dedicated detergent and close the lid.
NOTE
- Never place laundry in the tub when cleaning inside the tub, as
this can cause discoloration or damage to the laundry.
- When doing the laundry after cleaning the tub, you may find
some impurities.
These are just detergent residues and impurities after the tub
cleaning. Perform the rinse cycle two to three times.
HEAVY DUTY Program
This program is suitable for heavily soiled laundry
Load size and water level is determined automatically or you
can choose the water level you want
Unplug the power cord after washing.
ECONO Wash Program
Saving your time, energy and water
Achieving Rinse performance which is determined at AS/NZS
2040
This program is suitable for lightly soiled laundry
Load size and water level is determined automatically or you
can choose the water level you want
Unplug the power cord after washing.
※Keeping the tub clean
When using the machine under humid conditions for an
extended time, various bacteria from the air may stick to
the tub and form black dirt (fungi), causing damage to the
human body.
To keep the tub clean and hygienic at all times, it is
recommended reading “Cleaning the Tub” above and using
only dedicated or recommended detergents to clean the tub
regularly at least once every one to three months.
WOOL Program
This program is suitable for woollen clothes
Only high and medium water levels are available
Unplug the power cord after washing.
SW62ASP-01488K_EN.indd 8 2006-06-05 ｿﾀﾀ・9:15:11