8
OPTIONAL CYCLE
Water does not drain
Is the drain hose down? (No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water does not drain in 15
minutes, a buzzer will sound,
and the remaining time
indicator will show “E”
While lid is opening,
the washing machine won’t work
Make sure to close the lid while washing
machine is operating.
Water supply does not stop
Close the water tap.
Disconnect the power supply cord.
Call Samsung or service centre.
WASH ONLY
● When you choose this cycle, only wash cycle is operated.
● Pressing optional cycle key during washing changes the wash
time in two minute intervals.
● The wash time can be changed to between 3 and 25 minutes.
● Load size and water level is determined automatically.
❋ Unplug the power cord after washing.
SPIN ONLY
● When you choose this cycle, only spin cycle is operated.
● Pressing cycle key during spinning only cycle changes the
spin dry time.
The spin dry time can be changed to between 1 and 7 minutes.
❋ Unplug the power cord after washing.
RINSE ONLY
● When you choose this function, only rinse cycle is operated.
● Pressing function key during rinsing changes the number of
rinses. Up to 5 rinses can be optionally selected.
❋ Unplug the power cord after washing.
DELAY START
● This function allows you to delay the start of your chosen wash program for 3, 4, ... 18 hours.
● By pressing the delay start key you can select delayed period for 3, 4, ... 17, 18 hours, and your washing machine will finish
the selected wash program after the delayed period.
RINSE AND SPIN ONLY
● When you choose this cycle, only rinse & spin cycle are
operated without wash cycle.
● Pressing cycle key during operation changes the number
of rinse (see above).
You cannot change the spin dry time using this function.
❋ Unplug the power cord after washing.
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?
If water is not supplied in 60 minutes,
a buzzer will sound, and the remaining
time indicator will shown “7E”.
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Is the lid closed?
SOAK
● The laundry is soaked in water so that heavy dirt can be
eliminated sufficiently.
● You can choose soak cycle after choosing wash program.
● When you select soak function, 5 minute cycle (1 min.
washing then 4 min. pause) continue for 30 minutes before
main wash program.
● Load size and water level is determined automatically.
❋ Unplug the power cord after washing.
DRIP DRY
● This function allows you to take drip clothes out of the washing
machine while they are still wet before the final spin.
● You can choose drip dry cycle after choosing main wash
program.
● When you select drip dry the cycle is finished before final spin.
❋ Unplug the power cord after washing.
Washing machine won’t work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is the fuse all right?
Is there enough water?
TROUBLESHOOTING