Filter
Top Products
Washing a Load of Laundry
SAMSUNG
Washing Machine Owner’s Instructions 9
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:
1. Press the (On/Off) button.
2. Pour a little detergent into compartment in the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Temperature button repeatedly until 40 ˚C is displayed.
5. Press the Start/Pause button.
•
This will remove any water from the manufacturer’s test run remaining in the machine.
Putting detergent in the washing machine
1. Pull out the detergent drawer.
2. Add laundry detergent into compartment .
3. Add softener into compartment (if you desire).
4. Add prewash detergent into compartment (if you desire).
*Option
Using Hot Water
•
The hot water valve is operated when you select a water temperature option above 60˚C
(60 ˚C or 95 ˚C).
To add liquid detergent:
1. Remove the divider from its slot and insert it into compartment .
2. Pour in the liquid detergent.
•
Liquid detergents and Delay Start. (Please see "Delay Start" on page 12)
With Delay Start use a dosage container for liquid detergents, e. g. ball, otherwise the liquid
detergent will run slowly out of the soap dispenser and congeal. If a blockage and nasty smell
occur, take the dosage container out of the drum at the end of the programme.
With liquid detergents use the liquid insert in the soap dispenser. Or use dosage aids, e. g. dosage
or bags which are provided with the detergent.