Filter
Top Products
48_ Operating instructions, tips
Operating instructions, tips
7. Once the Start/Pause button is pressed the “PS” will start to blink.
Once it starts blinking the phone will automatically start to connect.
Figure 8
8. The washer name will be displayed once again. You need to press this
tab to display the “PS”.
Figure 9
9. After you touch the washer name tab, “PS” will be displayed.
Figure 10
10. After the “AP” is displayed, press the Temp & Start/Pause buttons
simultaneously for 3 seconds. Now press and hold the Signal button
to stop the Wi-Fi icon from blinking.
Once the Wi-Fi connection is established, begin at fi gure #8 to
reconnect to the same network/wireless AP.
Figure 11
DV455-02836F-02_EN_20120625.indd Sec3:48DV455-02836F-02_EN_20120625.indd Sec3:48 2012-06-25 5:21:172012-06-25 5:21:17