Filter
Top Products
Installing your dryer _27
01 INSTALLING YOUR DRYER
DOOR REVERSAL
1. Unplug the power cord.
2. Remove two door hinge screws.
3. Lift the door and remove it.
4. Remove two screws from the frame front.
5. Remove the two screws from the opposite side of the door
hinge.
6. Remove the two screws from the holder lever.
7. Reassemble the two screws on the inside holes.
8. Remove a screw from the door hinge.
The screw is for pre-fi xing the door to the frame front.
DV455-02836F-02_EN_20120625.indd 27DV455-02836F-02_EN_20120625.indd 27 2012-06-25 5:21:062012-06-25 5:21:06