Operating Instructions, Tips _21
RACK DRY
Installing the drying rack
1. Open the dryer door.
2. Position the drying rack in the tumbler, placing the rear legs in the two recessed areas of the
dryer’s back wall.
3. Place the front lip of the drying rack on top of the lint filter.
4. Place the items to be dried on the rack, leaving space between them so air can reach all
surfaces.
5. Close dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS SUGGESTED TEMP. SETTINGS
Washable sweaters
(block to shape and lay flat on rack)
Heat (Low/Extra Low)
Stuffed toys
(cotton or polyester fiberfilled)
Heat (Low/Extra Low)
Stuffed toys
(foam or rubber-filled)
Air Fluff
Foam rubber pillows Air Fluff
Sneakers Fluff or Heat
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and
lead to a fire hazard.
02 Operating Instructions, Tips
WARNING
DV337AEW-02453A-04_EN.indd 21 2007-07-23 ¿ÀÈÄ 1:47:33