Filter
Top Products
14-6
11 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
a noise A noise being occurred
intermittently during
dehydrating
General
consulting
..Make a comment
for the customer
to prepare the
memorandum since
he can not be
famaliar with the
contents comple
tely.
Did you
remove the
washer safety
device? It
may be
occurred
when the
laundry is
leaned to
one direction
or the
machine
is not aligned
horizontally
or the foreign
material is
entered.
- Please check whether the machine-installed
place is not leaned to one direction and then
level it and then check whetehr there is no fo-
reign material inside such a the coin or pin. If the
noise occurs without any problem in the machine
a check is requir
12 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
a noise A noise to touch other
parts
General
consulting
..Make a comment
for the customer
to prepare the
memorandum since
he can not be
famaliar with the
contents comple
tely.
It may be
occurred
when the
laundry is
leaned to
one direction
or the
machine
is not aligned
horizontally
or the foreign
material is
entered.
- Check whether the machine-installed place
is not leaned to one direction and then align it
horizontally and then check whetehr there is no
foreign material inside such as the coin or pin.
If the noise occurs without any problem in the
machine. Inspectio
13 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
a noise A noise of Motor AS rere
commen
ded
Noise during water
darainage -roaring
sound
You are rerecommended our engineer’s inspec-
tion because there may be a problem on the
components.
14 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
a noise A noise being occurred
during water supply
General
consulting
The foreign
material
may be
inserted
inside the
water supply
hose or the
pressure of
water may be
too high or
too weak.
- In case that there is a noise during water sup-
ply open or close the tap little by little to adjust
the water pressure to the proper level. If a noise
occurs continuously disconnect the water supply
hose connected to the machine and check
whether there
15 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
a noise Water leakage being oc
curred at water supply
connection
General
consulting
Lead to re
assembe
when water
supply hose
is departed.
Disconnect the water supply hose and reas-
semble.
16 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water le
akage
related
Water being overfl o
wed from detergent
box(front loading wa
shing machine)
General
consulting
It may be
used with so
much de
tergent or
left alone
for a long
time without
use.
- If the detergent input is impossible insert a
proper amount of detergent inot the detergent
box and if it is clogged take out the box forward
and clean it.
17 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water le
akage
related
Water bein leaked to
fl oor
General
consulting
It is a
symtom
occurred
when the
hose of bot
tom not
outside is
departed or
torn off.
- Check the machine for the water drainage rou-
te under the machine. If the water drains through
the other side not the drainage side check by
the engineers.
18 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water le
akage
related
water being leaked at
water supply connec
tion part
General
consulting
It may be
occurred
when it is
pushed out
due to the
water pres
sure or it has
bad connec-
tion.
- Disconnect the coupler and reassemble it. It
had better to assemble by yourself because the
engineer’s visit for service will be additionally
charged in case of diffi cut installation by custo-
mer. In case of the damage or missing of coupler
you can buy i
19 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water
leakage
related
Water leakage being
occurred during water
supply
General
consulting
The leakage
during water
supply can
occur
possibly due
to the bad
connection
of tap and
coupler and
water supply
hose.
- First re-assemble the coupler and then check
by the engineer if it continues.