Operating Instructions, Tips _23
RACK DRY
Installing the drying rack
1. Open the Dryer door.
2. Position the drying rack in the tumbler, placing the rear legs in the two recessed areas of the
dryer’s back wall.
3. Place the front lip of the drying rack on top of the lint filter.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the Dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS SUGGESTED TEMP. SETTINGS
Washable sweaters
(block to shape and lay flat on rack)
Low or Extra Low
Stuffed toys
(cotton or polyester fiberfilled)
Low or Extra Low
Stuffed toys
(foam or rubber-filled)
Air Fluff
Foam rubber pillows Air Fluff
Sneakers Air Fluff or Heat (Extra Low)
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and
lead to a fire hazard.
02 Operating Instructions, Tips
WARNING
DV218AEW-02568A_EN.indd 23 2008-03-14 ¿ÀÈÄ 6:11:31