Filter
Top Products
5
WASHING PROCEDURE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap
open. Plug the power cord in. Make sure to lay down the
drain hose. (In case no drain pump)
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
FUZZY(DIGITAL) COURSE
Selects the best washing course
automatically.
1. Press the POWER Button to"ON".
2. Press the START/HOLD button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
3. Close the lid.
❈ Select the Silver Wash button to perform anti-bacteria
washing.
BLANKET COURSE
1. Press the power button to "ON".
2. Press the course select button once.
3. Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
❈ Select the Silver Wash button to perform anti-bacteria
washing.
SUPER CLEAN COURSE
Use for cleaner washing.
1. Press the power button to "ON".
2. Press the course select button two times.
3. Press the START/HOLD button and put
the proper amount of detergent into tub.
Water level is selected automatically.
Water level is only selected MAXIMUM ~ MEDIUM.
4. Close the lid.
The washing finishes by the time you reserved.
❈ The tempering feature is included in the Super Clean
course. This is why the additional tempering course is
not selected.
❈ Select the Silver Wash button to perform anti-bacteria
washing.
SPEEDY COURSE
Because washing is speedy, it is
good for light or less stained laundry.
1. Press the power button to "ON".
2. Press the course select button three times.
3. Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
❈ Select the Silver Wash button to perform anti-bacteria
washing.
WOOL COURSE
1.Press the power button to "ON".
2.Press the course select four times.
3.Press the START/HOLD button.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
CAUTION . . .
-Do not use water above 30˚C for WOOL washing.
-Refer to the tag attached on the clothes for washing
information.
-Fasten buttons and turn inside out before washing.
-Use the detergent indicated in the laundry.
-When the degree of dirt is extreme, soak the laundry in warm
water for about 10 minutes before pressing the WOOL course
button in order to enhance washing efficiency.
❈ In the Wool course, the Silver Wash course does not
work as it could damage the washed items.
POWER
COURSE
START/
HOLD
POWER
COURSE
START/
HOLD
POWER
COURSE
START/
HOLD
POWER
START/
HOLD
POWER
COURSE
START/
HOLD