Samsung B1045A Washer User Manual


 
Washing a Load of Laundry
6
SAMSUNG
Washing Machine Owners Instructions
Washing a Load of Laundry
SAMSUNG
Washing Machine Owners Instructions 7
Overview of the control panel
1. Digital graphic display
Displays the remaining wash cycle time,all of washing information and error messages.
2. Prewash selection button
Press the button to select pre-wash. Pre-wash is available only with Cotton, Coloureds,
Synthetics, Delicates,baby programs.
3. Temperature selection button
Press the button repeatedly to cycle through the available water temperature options
(cold water( ), 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
4. Rinse selection button
Press the rinse button to add rinse cycles. Maximum number of rinse cycles is five.
5. Spin selection button
Press the button repeatedly to cycle through the available spin speed options.
No spin
The laundry remains in the drum without being spun after the final drain
Rinse Hold
The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, either “Drain” or the “Spin” program must be run.
6. Delay Start selection button
Press the button repeatedly to cycle through the available delayed start options (from 3
hour to 24 hours in one hour increments).
Displayed hours means the time of finished washing-cycle.
B1445AV
,
, 400, 800, 1200, 1400 rpm
B1245AV/B1245AS/B1245A/R1245AV/F1245AV
,
, 400, 800, 1000, 1200 rpm
B1045A /R1045A /F1045A
,
, 400, 600, 800, 1000 rpm
: no spin, : rinse hold
7. Silver Nano selection button
Silver Nano water is supplied in washing as well as the last rinse, featuring sterilization
and antibacterial coating.
8. Half Load selection button
Press the button in case of half load(about 1~4kg) washing. This function saves washing
time and energy.
9. Child Lock selection button
This is a button for preventing children from manipulating the washing machine.
On/Off - To set the program on: Press the Start/Pause button to turn on the washing
machine. Press and hold down the [Rinse] + [Spin] button for 2-3 seconds. It can only be
activated when the machine is turned on. Once you set the baby program on while in
washing, no button is activated until you set if off. Even the POWER button will not be
activated. The Baby Program lamp lights on. To set the program off: Press and hold down
the [Rinse] + [Spin] button again for 2-3 seconds, then the lamp lights off and is set off.
Note: Check out the Baby Program button first when no button is activated while the
washing machine is working.
10. Fuzzy Control dial
Turn the dial to select one of the 14 available wash programs.
11. Start/Pause selection button
Press to pause and restart programs.
12. (On/Off) selection button
Press once to turn the washing machine on, press again to turn the washing machine off.
If the washing machine power is left on for longer than 10 minutes without any buttons
being touched, the power automatically turns off.
Cotton, Coloureds, Synthetics, Delicates, Wool, Hand wash, Quick,
Rinse+Spin, Spin, Drain, Baby Program(Stains, Delicates, Coloreds, Cotton)