Filter
Top Products
Washing procedure & program selection
26
• Leave the door of your machine open to allow the inner part of your machine to dry
after removing your laundry.
• Switch the programme dial to Stop.
• Unplug your machine.
• Turn the water faucet off.
Warning Symbols
Water cut off / Low Mains Pressure
If the symbol flashes on the electronic display:
• The water supply may be closed.
• Mains water may be cut-off. If so, switch the programme dial to the Stop position. You
can select a programme and run your machine after the mains water is flowing again.
• Mains water pressure may be low.
• Water inlet hose may be twisted.
• Water inlet hose may be clogged. Clean water inlet hose filters. (*)
• Valve inlet filter may be clogged. Clean the valve inlet filters. (*)
(*) See the chapter regarding maintenance and cleaning of your machine.
Blocked pump filter
If the symbol flashes on the electronic display:
• The pump filter may be clogged.
• The discharging hose may be clogged or twisted.