Filter
Top Products
6
Adding water
˾
If you need to add water during ironing.
UNPLUG the iron and repeat filling water
steps.
˾
Ensure iron is fully reheated after filling
before ironing.
˾
To avoid damage to clothes from dust
or dirt that may collect in the iron, we
recommend that for the first use or after
the iron has been stored for some time
that you first iron an old cloth, testing
both the steam and burst of steam
feature.
SELECTING THE TEMPERATURE
Set the temperature control according to
the type of fabric you are ironing.
Check the fabric's label for appropriate
setting.
Start at low temperature
● and graduate to high temperature ● ● ●.
For delicate fabrics we recommend carrying out a test on an unobstru-
sive part of the garment (inner seam). Steam can only be produced
when the thermostat is in the colored cotton/linen zone.
SETTING STEAM CONTROL
Slide the steam control towards the back of the iron until the steam
icon appears, so it is in the steaming position. Steam can only be
produced when the thermostat is in the colored cotton/linen zone.
Allow iron to heat up before switching the steam control to the steam-
ing position. When ironing at low temperatures, to avoid water leak-
age or spitting, set steam control to no steam position.
Iron ready for steam ironing
Steam is produced as soon as the iron is
held horizontally.
Steam off
Steam generation can be interrupted by
switching the steam control to the no steam
position.
Laundry Fabric Temperature
label setting
synthetics
e.g. viscose, ●
polyester
silk,
● ●
wool
cotton,
● ● ●
linen
max
cotton
wool
synth.
min
max
cotton
wool
synth.
min