Filter
Top Products
After use
• After using the steamer, switch the power off (power
indicator light will go out) and unplug the appliance. Wind
the power cord on its storage place under the appliance.
• Remove the steam hose.
• Empty the water container from the opening
shown in diagram 9b.
• Place the steam connector back into place. Wrap the hose
around the steamer and insert the steam head onto its
housing. The head slides over the raised channels for secure
storage.
• You can carry your steamer by its handle for easy
portability and storage.
Cleaning
Clean the main unit with a damp cloth. To maintain maximum
performance, your steamer must be descaled occasionally. The descaling
intervals will depend on the water quality and the frequency of use. The
unit should be descaled at least once a year or every 100 hours of use.
For descaling proceed as follows:
1. Unplug the unit and fill it with 1/3 white vinegar and 2/3 water.
2. Let the appliance run for 3 minutes and do not steam any clothing with
this mixture.
3. Switch the appliance off. Unplug it and allow to cool down for at least
30 minutes.
4. Empty the water over the sink. Rinse the appliance with fresh water.
5. Fill the unit with fresh water and repeat steps 2-4.
Be careful there may be hot water remaining in the
steam hose after use. Always remove the steam hose
before emptying your appliance.
For cord winding or transport, never turn your appliance upside down.
Empty all water from the unit before storing it.
8