Filter
Top Products
Lint removal
Lint can gather inside the dryer and be a fuel
for fire. It is recommended that lint be removed
every 2 to 3 years, or more often, depending
on dryer usage. Cleaning should be done by a
qualified person. If you have any questions,
please call our toll-free number at
l-800447-6737.
ElectrIcal Shock and
Personal InJury Hazard
l Unplug the power supply cord, or turn
off the electrical power at the main
power supply before removing dryer
panels.
l Make sure the dryer is cool.
l Dryer parts can have sharp edges. Use
care when handling.
Failure to do so could result in electrical
shock or personal injury.
1. Unplug the power supply cord, or turn off
the electrical power at the main power
supply.
2. Remove back panel (electric) or lower front
access panel (gas).
3. Remove lint from shaded area in illustration
with a soft brush or vacuum cleaner. Avoid
damaging wires, thermostats (electric),
funnel (gas) or ignitor (gas).
4. Replace panel; reconnect and level dryer
again, if necessary.
Thermostat8
Heat element
Electric
dryer with back panel removed
lgnitor
Funnel
Gas dryer with lower front
access panel removed
11