Models EL5030/GL5030
(Check behind dryer door for
model number)
selector
Model
and
serial number
Select cycle and
setting
A. Automatic Cycles
The automatic cycles let you select the
degree of dryness you want. A
thermostat senses the air temperature
and automatically shuts the dryer off
when the selected dryness is reached.
1. Use Auto-Sense Heavy to dry heavy
and medium-weight cotton or linen
items. The load tumbles without heat
the last 5 minutes for easier load
handling.
2. Use Auto-Sense Permanent Press to
dry permanent press, knits and other
synthetic items. The load tumbles
without heat during the last 10 minutes
to help prevent wrinkles and to make
the load easier to handle.
3. Adjusting the dryness levels. Set
the cycle control knob to Normal Dry in
the automatic cycle. When dryer stops,
feel the items for dryness.
If items are drier than you like, set the
conizol to the right of Normal Dry the
next time you dry that kind of load.
If the items are not as dry as you like,
set the control to the left of Normal Dry
the next time you dry that kind of load.
The cycle control knob will not move
until the clothes load is almost dry, or
the cool-down time of the cycle has
been reached. After the cool-down
cycle is finished, the cycle control knob
automatically moves to OFF and the
dryer stops tumbling.
B. Timed Dry
Use this cycle for drying a load for a set
time between 10 and 60 minutes. To
operate, turn cycle control knob to the
number of minutes you want. Push the
start button. (The last 5 minutes of this
cycle are without heat to help make the
load easier to handle and to reduce
wrinkling.)
NOTE: Overdrying can cause shrinkage,
static cling and damage to some fabrics.
C. Damp Dry
Use this setting to dry damp items or to
dry items to damp level (for example
heavy cottons such as jeans which you
do not want to become stiff or cotton
clothes which are easier to press when
damp.)
D. Wrinkle Free
Use this cycle to remove wrinkles from
clothing that has been packed in a
suitcase, closet or not removed
promptly from dryer. To operate, turn
cycle control knob to WRINKLE FREE;
set the temperature selector knob to
NOTE: Overdrying can cause shrinkage,
static cling and damage to some fabrics.
KNITS/LOW and push the start button.
The load will tumble in heated air for 15
minutes and without heat for 5 minutes
more. For best results, put only a few
items in the dryer and remove as soon
as the dryer stops. Fold or hang on
hangers immediately.
Select temperature
setting
A. No Heat/Fluff
Use for rubber, plastic and heat-
sensitive fabrics. (See chart on Page 3
for time settings.)
To operate, turn temperature selector to
NO HEAT/FLUFF. Turn cycle control
knob to TIMED DRYING and set the
number of minutes you want.
Push the start button.
B. Knits/Low
Use for medium/lightweight knits and
delicate fabrics.
C. Cotton/Perm Press High
Use for cotton, linen, permanent press
and heavyweight knit fabrics.
Page 5