Roper GL6050V Clothes Dryer User Manual


 
Thank you for choosing a Roper
appliance. This guide will help you
operate and maintain your new,
quality-built Roper electric or gas
dryer. Keep this guide in a safe place
for future reference.
First . . .
complete all
of the Installation
Instructions
before attempting to operate your
dryer.
Electric and
Gas Dryers
Use and
Care Guide
ROPER
Next . . .
complete and
mail the Product
Registration Card
This card enters your warranty into our
warranty system insuring efficient claim
processing. It can be used as a proof of
purchase for insurance claims and helps
Roper to contact you immediately in the
unlikely event of a product safety recall.
Please remember
It is your responsibility to be sure that
your dryer:
n Is properly installed by a qualified
person.*
Appliances
EL4030V
EL5030V
EL6050V
GL4030V
GL5030V
GL6050V
. Is installed and leveled on a floor that
can support the weight of the dryer.*
. Is located in a well ventilated room
where the temperature is above
45°F (7.2X).
. Is properly connected to a grounded
electrical circuit that meets the
electrical requirements.*
. Is properly connected to fuel and
exhaust systems.*
n Is not installed against drapes or
curtains.*
. Is used only for the job it was
designed to do.
. Is not used by children or anyone
unable to operate it properly.
m Is properly maintained.
l See Installation Instructions provided.
Energy-saving tips
. Use dryer during non-peak,
m Do Not overdry items.
energy-usage hours. Contact your
l Shorten drying times by:
power company for the most
- cleaning lint screen before or after
energy-efficient times.
each use.
. Dry only full loads.
1 Do Not add wet items to partially
- properly exhausting the dryer.
- using the dryer in a warm room.
dried load.
- not opening the dryer door often.
- loading the dryer with similar
fabric weights and types.
- not overloading the dryer.
- drying loads one immediately after
another.