Filter
Top Products
Selecting a cycle
Use pages 7 and 8 to find information about
drying cycles that may be on your model.
To Select a cycle:
1. Turn the Cycle Control Knob either way to
a desired time or setting.
2. Stop when the indicator points to the cycle
you want.
3. Push the Start Button.
Changing a selectIon:
1. Turn the Cycle Control Knob to point to a
new setting.
2. Push the Start Button, if necessary.
Using the Air cycle (no heat)
Flro Hazard
Do not dry plastic or rubber items with
heat. Use the Air cycle, or line dry.
Failure to do so could result in fire or
damaged items.
The dryer does not heat when the Cycle
Control Knob is set in the Air cycle. This cycle
can be used to fluff or air dry bedding, plastic
tablecloths, foam pillows, sneakers, etc.
1. Turn the Cycle Control Knob to the number
of minutes you want in the Air cycle. (Cycle
is unheated.) Refer to the chart below for
suggested times.
2. Push the Start Button.
NOTE: Repeat steps above if more time is
needed to dry items.
TYPE OF LOAD
RUBBER, PLASTIC, HEAT-SENSTTIVE FABRICS
Foam Rubber-Pillows, bras, stuffed toys
PlastioShower curtains, tablecloths
Rubber-backed rugs
Olefin, Polypropylene, Sheer nylon
I
AIR CYCLE