Filter
Top Products
Other Features
Rinse and spin
Drain and spin
Complete rinsing of fabrics washed with
A dram and spin may help shorten
extra detergent may require an extra
drying times for some fabrics or hand-
rinse and spin. To set for extra rinse and
washed items by removing excess
spin:
water.
1. Push cycle control knob in.
2. Turn knob clockwise to one of the
dots on the dial, as illustrated
above. (See arrows in drawing.)
3. Pull cycle control knob out. The
washer will fill to selected level,
agitate, drain and spin.
1. Push cycle control knob in.
2. Turn clockwise to any bar located
just before an OFF area on the dial,
as illustrated above. (See arrows in
drawing.)
3. Pull cycle control knob out. The
washer will drain and spin.
Laundry Load Guide
Use highest water level for these
suggested full-size loads.
Mixed Load
Heavy Work Clothes
2 double sheets or 2 pair pants
1 king-size sheet 3 shirts
4 pillowcases 3 pair jeans
6 T-shirts 1 coverall
6 pair shorts
2 shirts
2 blouses
6 handkerchiefs
Manual-clean lint filter
AL3132W
Clean the lint filter after every load.
1. Lift up agitator barrel.
2. Wash or wipe the filter clean
(located in bottom of the agitator
barrel). The filter is not removable.
3. Snap the agitator back into place.
NOTE:
On Model AL2121W, lint is
washed out with existing wash water. If
your washer drams into a tub, remove
any lint collected in the tub or strainer.
Towels
8 bath towels
8 hand towels
10 wash cloths
1 bathmat
Permanent Press
1 double sheet
1 tablecloth
1 dress
1 skirt
2 blouses
2 slacks
3 shirts
2 pillow cases
Knits
2 slacks
2 blouses
4 shirts
4 tops
2 dresses
Delicates
2 camisoles
4 slips
2 panties
2 bras
2 nighties
Page 6