Filter
Top Products
More specically:
DO NOT let children or untrained persons use the appliance without
supervision.
NEVER immerse the iron, cable or plug in any liquid.
DO NOT leave the hot iron touching fabrics or very inammable sur-
faces.
DO NOT leave the appliance unnecessarily plugged in. Disconnect the
plug from the mains when the appliance is not being used.
NEVER touch the appliance with wet or damp hands.
DO NOT use the power cord or the appliance in order to pull the plug out
of the socket.
DO NOT leave the appliance exposed to the weather (rain, sun, etc. ).
DO NOT leave the iron without supervision when it is connected to the
power supply.
DO NOT ll the reservoir with water before removing the plug from the
socket.
PLEASE NOTE!
Do not use chemical additive, scented substances or decalciers. Fail-
ure to comply with the above-mentioned regulations leads to the loss of
guarantee.
DESCRIPTION
OF DEVICE
(1). Spray organ (2). Filler door
(3). Steam dial (4). Shot-steam button
(5). Spray button (6). LCD window
(7). Maximum lling level (8). Temperature button
(9). Handle cover (10). Cord bushing
(11). Supply cord (12). Rear Bushion
(13). Rear top cap (14). Handle
(15). Rear middle cap (16). Transparent water tank
(17). Plate temperature control light (18). Self-cleaning button
(19). Plastic skirt (20). Plate with steam vents
DRY IRONING
To iron without steam, follow the instructions in section “steam ironing”,
leaving the steam selector (3) on position “0”.
Spray Function
Make sure that there is water in the reservoir. Press the spray button (5)
slowly (for a dense spray) or quickly (for a vaporized spray) [Fig. 6].
Warning: for delicate fabrics, we recommend moistening the fabric be-
forehand using the spray function (5), or putting a damp cloth between
the iron and the fabric. To avoid staining, do not use the spray on silk or
synthetic fabrics.
CLEANING
Please note: before cleaning the iron in any way, make sure that the
appliance plug is not connected to the socket.
Any deposits, starch residue or size left on the plate can be removed
using a damp cloth or an unabrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped over with
a dry cloth.
SELF-CLEANING
- The self-cleaning feature cleans inside the plate, removing impurities.
We recommend using it every 10-15days. Directions:
- Fill the reservoir up to the maximum level indicated and set the steam
selector (3) to “0”
- Set the temperature button (8) to the maximum temperature and wait for
the light (17) to turn off.
- Pull the plug out of the socket and hold the iron horizontally over the sink.
- Hold the cleanout button (18) setting until all the boiling water, steam,
impurities come out [Fig. 7].
- When the soleplate has cooled down, you can clean it with a damp cloth.
HOW TO PUT IT AWAY
- Disconnect the plug of the iron from the socket.
- Empty the reservoir by turning the iron upside down and gently shaking it.
- Leave the iron to cool down completely.
- Roll up the power cord with the rewinder [Fig. 8].
- Always put the iron away in a vertical position.
ADVICE FOR GOOD IRONING