Philips HI 312 Iron User Manual


 
4
Important
Please read the instructions for use in conjunction with the
illustrations before using the appliance.
Before using for the first time remove any sticker or protective
foil from the soleplate. Clean the soleplate with a soft cloth.
Before using for the first time, check if the voltage rating on
the typeplate corresponds to the mains voltage in your home.
Use an earthed wall socket.
Never use the appliance if it is damaged in any way.
Unplug the appliance from the mains:
- before filling the iron with water or pouring out the remaining
water after use;
- before cleaning the iron.
When you have finished ironing and also when leaving the iron
even for a short while:
- set the steam control to position O;
- stand the iron on its end;
- remove the mains plug from the wall socket.
Do not put vinegar, starch, chemically descaled water or
descaling agents in the water reservoir.
The cordset should not be allowed to touch the soleplate when
it is hot.
The ejected steam is hot and therefore hazardous. Never direct
the steam towards people.
Always keep the iron in a safe dry place, standing on its end.
Never immerse the iron in water.
Some parts of the iron have been slightly greased and, as a
result, the iron may slightly smoke when switched on for the
first time. After a short while, however, this will cease.
If the mains cord of this appliance is damaged, it must only be
replaced by a special cord or assembly available from the
manufacturer or its service agent.
This appliance is not intended for use by young or infirm
persons without supervision.
Young children should be supervised to ensure that they do
not play with the appliance.
English