Philips GC1705 Iron User Manual


 
Cleaning the steam control needle
1 Pull the steam control out of the appliance (fig. 13).
2 Use vinegar to remove scale, if any, from the needle (fig. 14).
Do not bend or damage the steam control needle.
3 Reinsert the steam control by placing the point of the needle exactly in the centre of the
hole and by fitting the small projection on the side of the needle into the slot (fig. 15).
4 Set the steam control to position O.
Storage
1 Make sure the appliance is unplugged and set the steam control to position O.
2 Empty the water tank (fig. 16).
3 Wind the mains cord round the cord storage facility.
4 Store the iron on its heel in a safe and dry place (fig. 17).
Environment
Do not throw the appliance away with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this you will help to preserve
the environment (fig. 18).
Guarantee & service
If you need information or if you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your
local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal
Care BV.
ENGLISH10