Panasonic NA-F80T1 Washer User Manual


 
14
RESERVE Program
1
Press the [POWER ON] button and put in the laundry.
2
Choose the [PROGRAM] that suit to your laundry type.
3
Press the [RESERVE] button and select between 2 to 24 hours.
4
Press the [START/HOLD] button.
The machine will measure the load size without
water (laundry sensing).
«
The water level will be indicated automatically.
5
Put in the appropriate amount of
detergent into the detergent drawer for
the water level. Then close the lid.
7 Add softener. See page 7 for details.
The water level indication (recommended detergent
amount) will go off 2 minutes after starting the
program, but only indicate the end time of the
selected [RESERVE] 2 to 24 hours after current time.
Check the recommended detergent amount before
the indication goes off.
To check the contents of the reserve operation, keep
pressing [RESERVE] button.
The buzzer lets you know when the washing is finished.
1
4
2
You can select the finishing of the washing course between 2 to 24 hours from the current time.
(Sometimes the operation exceeding the reserve time because of the water feeding and draining
condition.) [RESERVE] program only can use for NORMAL, MINI and HYPER SPEEDY Course.
3
Manual Setting [RESERVE]
1
Press the [POWER ON] button and put in the laundry.
2
Press the [WASH] button, [RINSE] button,
[SPIN] button, [WATER LEVEL] button.
Choose the process [WASH] button, [RINSE] button,
[SPIN] button, [WATER LEVEL] button that suit to
your laundry type.
3
Press the [RESERVE] button and select between 2 to 24 hours.
4
Press the [START/HOLD] button.
5
Put in the appropriate amount of
detergent into the detergent drawer for
the water level. Then close the lid.
7 Add softener. See page 7 for details.
The water level indication (recommended
detergent amount) will go off 2 minutes after starting
the program, but only indicate the end time of the
selected [RESERVE] 2 to 24 hours after current
time. Check the recommended detergent amount
before the indication goes off.
To check the contents of the programming timer,
keep pressing [RESERVE] button.
The buzzer lets you know when the washing is finished.
To choose manual setting under Reserve Course.
1
4
3
2
NA-F90T1 80T1_EN.indd 14NA-F90T1 80T1_EN.indd 14 9/17/08 9:45:20 AM9/17/08 9:45:20 AM