Panasonic NA-16VX1 Washer/Dryer User Manual


 
35
Moving and installing (continued)
Moving the washing machine from one location to another
Make sure to fix the anchor bolts for transportation to the washing
machine.
Beforeyoumovethewashingmachine
●Shutthetapandrunthewashingmachinetodrainthewater.Drainanyremaining
water from the pump hose. (see page 29)
●Depressurisethewater-supplyhoseandremoveit.
●Disconnectthepowercable.
●Attachtheanchorbolts(seebelow).
Attaching the anchor bolts
Unscrew and remove the four cover caps.
Same level
Pull the bolts out, so their tips are level with the tips of the
sleeves.
( Ask someone else to hold the upper surface of the drum
and pull it forward.)
1
2
3
4
1
2
3
4
Insert the transportation guards 1, 2, 3 and 4.
Tighten each bolt.
26 mm
Tighten the bolt so that spring length becomes 26mm.
How to install Moving and installing
NA-16VX1_E.indb 35 2009/08/05 11:34:18