Panasonic FK3300 Washer/Dryer User Manual


  Open as PDF
of 4
 
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/Medium-size FK
3300
Capacitance (µF)
Rated Voltage Mark
Series identification
Mark for Lead-Free
Products
Black Dot (Square)
Lot number
Negative
polarity
marking (–)
jFK
0.3 max.
A±0.2
W
( )reference size
L±0.5
φD±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
■ Features
●
Endurance: 5000 h at 105 °C
●
Vibration-proof product is available upon request.
●
RoHS directive compliant
Surface Mount Type
Series:
Medium-size FK
Type:
V
FK
High temperature Lead-Free refl ow(suffi x:A
✽
)
■ Specifi cations
Category Temp. Range –55 °C to +105 °C
Rated W.V.Range 6.3 V.DC to 100 V.DC
Nominal Cap.Range 47 µF to 6800 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV (µA) After 2 minutes
tan
δ
Please see the attached High temperature lead-free refl ow products list.
Characteristics
at Low Temperature
W.V. (V) 6.3 10 16 25 35 50 63 80 100
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C)
222222222
Z(–40 °C)/Z(+20 °C)
333333333
Z(–55 °C)/Z(+20 °C)
444333333
Endurance
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value
tan
δ
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan
δ
<
initial specifi ed value
DC leakage current
<
initial specifi ed value
■ Di men sions in mm (not to scale)■ Marking
Example:6.3 V 3300 µF Marking color : BLACK
Rated Voltage Mark
(mm)
Size
code
DLA,BH max.I W P K
H13 12.5 13.513.5 15.0 4.70.90±0.3 4.4 0.70±0.3
J16 16.0 16.5 17.0 19.0 5.5 1.20±0.3 6.7 0.70±0.3
K16 18.0 16.5 19.0 21.0 6.7 1.20±0.3 6.7 0.70±0.3
j6.3 V
A10 V
C16 V
E25 V
V35 V
H50 V
J63 V
K80 V
2A 100 V
Jul. 2008
next