Filter
Top Products
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
• It is recommended that you use
up one beaker of water by
operating your iron’s steam and
shot of steam functions before
ironing any clothes, as some
dripping may occur while your
iron’s steam system is activated.
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your home
are not suitable for the plug
supplied with this appliance, the
plug should be removed and the
appropriate one fitted.
WARNING: The plug removed
from the mains lead, if
severed, must be destroyed,
as a plug with a bared flexible
cord is hazardous if engaged
into a live socket outlet.
Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.
WARNING: This appliance
must be earthed.
Symbol
(120°C Max) Cool
(160°C Max) Warm
(210°C Max) Hot
Control knob
positions
Do not iron
at all
Fabric
Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing
Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
With water in tank Dry and spray
Steam/spray/shot of steam
Without water in tank Dry ironing
INSTRUCTIONS FOR USE
3
Temperature guide
For details of other Morphy Richards products, please see our website:
RN40514MUK Rev1:RN40514 MUK Rev1 20/11/2009 16:17 Page 3