Filter
Top Products
5
Dry ironing
Your iron can be used for dry ironing. Set the
variable steam switch
(4)
to ‘ ’ and set the
temperature dial
(8)
as desired (see page 3).
You won’t need water in the tank unless using the
water spray or steam boost features
.
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, etc. Hold the iron
between 1cm and 2cm away from the item and
press the steam boost button
(3).
Anti-drip system
This prevents water escaping from the soleplate
(6)
when the iron is too cold.
During use, the anti-drip system may emit a loud
click, particularly during heat-up or whilst cooling
down. This is perfectly normal and indicates that
the system is functioning correctly
.
Life long anti-scale system (certain
models only)
This system reduces scale deposits and helps
prolong the life of the iron
.
Features of your iron
3
3
To clean a stainless steel soleplate
We recommend using a generally available gentle
chrome, silver or stainless steel cleaner. Always
follow the manufacturer’s instructions.
To clean a coated soleplate
Do not use scouring powder or solution as this
could cause damage to the coating.
To clean either soleplate type
If any man-made fibres fuse to the soleplate (6),
set the iron at the 3-dot position for a stainless
steel soleplate, or MAX position for a coated
soleplate, and pass it over a clean piece of cotton
to draw the deposit off the surface.
To clean the exterior
Allow the unit to cool and wipe over with a damp
cloth and mild detergent, then wipe dry.
When you have finished ironing, unplug and
empty all water from your iron and set the steam
switch at the ‘ ’ position. When cool, store the
iron on its heel with the cord wrapped loosely
around the heel.
Maintenance Emptying and storing
RN40420 MUK Rev1 1-colour_Layout 1 24/02/2012 10:38 Page 5