Filter
Top Products
• If you drop or severely knock
your iron, this could cause
internal damage even if the
outside appears alright. Have it
checked by a qualified
electrician.
• It is recommended that you use
up one beaker of water by
operating your iron’s steam and
shot of steam functions before
ironing any clothes as some
dripping may occur while your
iron’s steam system is activated.
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your
home are not suitable for the
plug supplied with this
appliance, the plug should be
removed and the appropriate
one fitted.
WARNING: The plug removed
from the mains lead, if
severed, must be destroyed,
as a plug with a bared flexible
cord is hazardous if engaged
into a live socket outlet.
Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.
WARNING: This appliance
must be earthed.
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
Symbol
(120°C Max) Cool (160°C Max) Warm (210°C Max) Hot
Control knob
positions
Do not iron
at all
Fabric Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing Iron on wrong side,
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
With water in tank Dry and spray
Steam/spray/shot of steam
Without water in tank Dry ironing
INSTRUCTIONS FOR USE
3
Temperature guide
For details of other Morphy Richards products, please see our website:
RN40704 MUK Rev3:RN40704 MUK Rev3 19/02/2009 15:51 Page 3