Filter
Top Products
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
• If you drop or severely
knock your iron this could
cause internal damage
even if the outside appears
alright. Have it checked by
a qualified electrician.
• It is recommended that you
use up one beaker of water
by operating your iron’s
steam and shot of steam
functions before ironing
any clothes as some
dripping may occur while
your irons steam system is
activated.
Electrical
requirements
Check that the voltage on
the rating plate of your
appliance corresponds
with your house electricity
supply which must be A.C.
(Alternating current).
If the socket outlets in your
home are not suitable for
the plug supplied with this
appliance, the plug should
be removed and the
appropriate one fitted.
WWAARRNNIINNGG:: TThhee pplluugg
rreemmoovveedd ffrroomm tthhee mmaaiinnss
lleeaadd,, iiff sseevveerreedd,, mmuusstt bbee
ddeessttrrooyyeedd,, aass aa pplluugg wwiitthh
aa bbaarreedd fflleexxiibbllee ccoorrdd iiss
hhaazzaarrddoouuss iiff eennggaaggeedd
iinnttoo aa lliivvee ssoocckkeett oouuttlleett..
Should the fuse in the 13
amp plug require changing,
a 13 amp BS1362 fuse
must be fitted.
WWAARRNNIINNGG:: TThhiiss
aapppplliiaannccee mmuusstt bbee
eeaarrtthheedd..
wwwwww..mmoorrpphhyyrriicchhaarrddss..ccoomm
Symbol
(120°C Max) Cool (160°C Max) Warm (210°C Max) Hot
Control knob
positions
Do not iron
at all
Fabric
Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing
Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
With water in tank Dry and spray
Steam/spray/
shot of steam
Without water in tank Dry ironing
‘Max setting’
Self clean
INSTRUCTIONS FOR USE
33
Temperature guide
40725 rev4 28/8/07 15:32 Page 3